JetCat P400-Pro-GH

Jet-Cat P400 Pro-GH

This turbine engine is designed for industrial or professional use and has a starter/generator and can supply his own electrical power to charge the battery and additional electrical equipment.

Optional the turbine can be equipped with a bleed air point with a one way valve , so it can pressurize the fuel tank or other equipment which use bleed air.

Max.electrical power output is 900 Watt in a voltage range of 1 - 36 volts.

At idle power the generator can give 12 volts and 7,5 Amp DC , at 33.000 RPM , at a RPM of 100.000 the voutput can be 35 volts and 22 Amp.

The turbine is designed for professional and industrial use 

This single shaft Turbine is equipped with a radial compressor ,diffusor , combustion chamber , turbine and Exhaust nose.

Pro will will say, digital controlled with internal fuel valve , internal  fuel pump,internal power bus for a single connection to ECU V10.0 , only one correction for the fuel line , internal Kero start and a starter /generator to supply electrical power when running

External the Fuel pump and Li-po battery.

Technical data :

Idle RPM:                                                       30.000 R/min

Max. RPM                                                       98.000 R/min

Idle Thrust                                                     14 N

Max Thrust                                                     397 N

Exhaust temperature                                       480-750 Celsius

Pressure rate                                                  3,8

Mass stream                                                   0,67 kg /sec

Jet blast speed                                                2122 km/h

Jet performance                                              116,4 KW

Battery Charge performance                             85 Watt

3 Phase AC (W) / Voltage                                 900 Watt / 10- 36 Volts

Fuel consumption at max RPM                          1300 ml /min

Fuel consumption at idle RPM                           200 ml/min

Fuel Consumption Idle                                     0,16 Kg / min

Fuel Consumption at Max. RPM                         1,040 Kg/ min

SFC@ max RPM                                               0,158 Kg/Nh

Weight incl valve and starter                            3650 gram

Outer diameter                                               148,4 mm

Length                                                           342 mm

Fuel J-A1 or parafine with 5% turbine oil Aero Shell 500 or BP 2380

3 years warranty

Made in Germany

To control this turbine the is a choice of the RC installation kit or an Industrial installation kit .

Engine mounts required price € 25,50

There is a Jet Cat Questionnaire to be fill in when ordering this turbine, you can reply for this.

Options  RC installation kit : € 285,00

             Industrial installation kit € 185,00