JetCat P300-PRO-GH
JetCAT P300-PRO-GH
Thrust 300 Newton ( 30 Kg or 66 Lbs)
Jet-Cat P300-Pro-GH
This turbine is designed for professional and industrial use and is equipped with a Starter /Generator.
During the startup sequence it works as a starter motor , as soon the turbine is stabilized on his idle RPM , it change to a generator which charge the engine battery and supply electricity to additional equipment.
A bleed air with a one way valve is optional
Max. electrical poer output is 900 watt in a voltage range of 1-36 volt.
At idle power the generator can give 12 volt and 7,5 Amp DC , at 33.000 Rpm ,at a RPM of 100.000 the output can be 35 volt with 22 Amp DC
This turbine is designed for industrial purposes
This single shaft Turbine is equipped with a radial compressor ,diffuser , combustion chamber , turbine and Exhaust nozzle.
RXG will say, digital controlled with internal fuel valve's , internal power bus system and internal Kero start and a starter /generator which give electrical power when running.
External the Fuel pump ,ECU and Lipo battery.
Technical data :
Idle RPM: 35.000 R/min
Max. RPM 106.000 R/min
Idle Thrust 14 N
Max Thrust 300 N
Exhaust temperture 480-750 Celsius
Pressure rate 3,55
Mass stream 0,5 kg /sec
Jet blast speed 2160 km/h
Jet performance 90 KW
Fuel consumption at max RPM 980 ml /min
Fuel consuption at iddle RPM 179 ml/min
SFC@ max RPM 0,157 Kg/Nh
Weight incl valve and starter 2.630 gram
Outer diameter 132 mm
Length 365 mm
Fuel J-A1 or parfine with 5% turbine oil Aero Shell 500 or BP 2380
Made in Germany
3 years warranty
We ship world wide , outside the European Union the VAT rate is "0" %
than your price is € 4.958,00
The complete set comes with : Turbine , ECU V 10.0 ,GSU V2 ,fuel pump ,engine mount .Lipo battery , Led interface print ,valves , fuel lines with festo connectors , electro cable and instruction manual
Price on request
Call +31365309881 of mail info@modelaircraftcompany.com